Partsidentification
A Protective cap
B Outer foil section
1 System outer foil
2 System outer foil
release buttons
3 Foil frame
C Inner blades
D Main body
4 Foil frame release
buttons
5 0/1 switch
8
ES-RL40_CH.indb
8
6 Switch lock button
7 Charge indicator
lamp
8 Trimmer
9 Trimmer handle
E Adaptor (RE‑8)
: Power cord
; Appliance plug
F Travel pouch
G Cleaning brush
Charge
Chargingtheshaver
Perform the following steps to charge the shaver if it
seems to lose the speed.
You can fully charge the shaver in 1 hour.
•
A full charge will supply enough power for approx. 14
shaves of minutes each.
1
1
Inserttheappliancepluginto
theshaver.
2
2
Plugintheadaptorintoa
householdoutlet.
•
When charging the shaver for the first time or when it
has not been in use for more than months, please
charge it for 8 hours (in order to activate the
rechargeable battery). If you charge the shaver with
the batteries completely discharged, the charge
indicator lamp may not glow immediately. However,
the lamp will glow normally after charging for a few
minutes.
Cordshaving
If you insert the appliance plug to the shaver and plug
in the adaptor into a household outlet, you can use it
even if the battery capacity is low.
•
If the shaver does not work, continue charging it for
approx. 1 minute.
2010/01/05
20:10:22