Table of Contents
Advertisement
►
Replacingtheinnerblades
1. Press the foil frame release
buttons and lift the outer foil
section upwards as illustrated.
. Remove the inner blades one
at a time as illustrated.
•
Do not touch the edges
(metal parts) of the inner
blades to prevent injury to
your hand.
. Insert the inner blades one at
a time until they click as
illustrated.
Cleaningwiththebrush
Clean the inner blades using the
short brush by moving it in
direction (A).
Clean the system outer foil, the
shaver body and the trimmer
using the long brush.
•
Do not move the short brush in
direction (B) as it will damage
the inner blades and affect their
sharpness.
•
Do not use the short brush to
clean the outer foils.
ES-RL40_CH.indb
11
Removingthebuilt‑inrechargeable
1
batteries
Remove the built‑in rechargeable batteries before
disposing of the shaver. Please make sure that the
batteries are disposed of at an officially designated
location if there is one. Do not dismantle or replace the
batteries so that you can use the shaver again. This
2 3
could cause fire or an electric shock. Replace them at
an authorized service center.
•
Disconnect the power cord from the shaver when
removing the batteries.
•
Perform steps 1 to 7 and lift the batteries, and then
remove them.
(A)
(B)
Forenvironmentalprotectionandrecyclingof
materials
This shaver contains Nickel‑Metal Hydride batteries.
Please make sure that the batteries are disposed of
at an officially assigned location, if there is one in your
country.
11
2010/01/05
20:10:22
Advertisement
Table of Contents
