Honda CBF150 2002 Manual page 307

SERVICE INFORMATION
GENERAL
• A halogen headlight bulb becomes very hot while the headlight is "ON", and remains hot for a while after it is turned
"OFF".
Be sure to let it cool down before servicing.
• Keep all flammable materials away from the electric heating element. Wear protective clothing, insulated gloves and
eye protection.
• Note the following when replacing the halogen headlight bulb.
– Wear clean gloves while replacing the bulb. Do not put finger prints on the headlight bulb, as they may create hot
spots on the bulb and cause is to fail.
– If you touch the bulb with your bare hands, clean it with a cloth moistened with alcohol to prevent its early failure.
– Be sure to install the dust cover after replacing the bulb.
• Check the battery condition before performing any inspection that requires proper battery voltage.
• A continuity test can be made with the switches installed on the motorcycle.
• The following color codes are used throughout this section.
Bu = Blue G = Green
Bl = Black Gr = Gray
Br = Brown Lb = Light Blue
SPECIFICATIONS
Bulbs Headlight (Hi/low beam)
Brake/tail light
Turn signal light
Instrument light
Turn signal indicator
High-beam indicator
Neutral indicator
Fuse
Fuel level sensor resistance
(20°C/68°F)
TORQUE VALUES
Fuel level sensor mounting nut
Lg = Light Green
O = Orange
P = Pink
ITEM
Main
Sub
Full
Empty
10 N·m (1.0 kgf·m, 7 lbf·ft)
LIGHTS/METER/SWITCHES
R = Red
W = White
Y = Yellow
SPECIFICATION
12 V - 35/35 W
12 V - 21/5 W
12 V - 21 W x 4
12 V - 1.7 W x 3
12 V - 1.7 W
12 V - 1.7 W
12 V - 1.7 W
15 A
10A
4 - 10 Ω
90 - 100 Ω
17-3