Installing The Appliance; Preparing The Appliance For The First Time; Connecting The Appliance To The Electricity Supply; Familiarising Yourself With Your Appliance - Bosch KGN86 Series Information For Use

Over-and-under and side-by-side
installation
If you want to install 2 refrigerating
appliances one over the other or side
by side, you must maintain a clear-
ance of at least 150 mm between the
appliances. Selected appliances can
be installed without a minimum clear-
ance. Ask your dealer or kitchen
planner about this.
4.3 Installing the appliance
Install the appliance in accordance
▶
with the enclosed installation in-
structions.
4.4 Preparing the appliance
for the first time
Remove the informative material.
1.
Remove the protective foil and
2.
transit bolts, e.g. remove the ad-
hesive strips and carton.
Clean the appliance for the first
3.
time. → Page 30
4.5 Connecting the appliance
to the electricity supply
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate. → Fig.
Check the mains plug is inserted
2.
properly.
a The appliance is now ready for
use.
/
1 7
Familiarising yourself with your appliance en

Familiarising yourself with your appliance

5 Familiarising yourself
with your appliance
Familiarising yourself with your appliance
5.1 Appliance
You can find an overview of the parts
of your appliance here.
→ Fig.
1
Refrigerator compartment
A
→ Page 27
Freezer compartment
B
→ Page 28
Camera
1
Lighting
2
Snack container → Page 19
3
Variable shelf → Page 19
4
Interior ventilation opening
5
Temperature controller (stor-
6
age container) → Page 22
Rating plate → Page 38
7
Storage container
8
→ Page 19
Fruit and vegetable container
9
with humidity control
→ Page 19
Frozen food container
10
→ Page 31
Ice cube maker → Page 20
11
Screw foot
12
Butter and cheese compart-
13
ment → Page 20
Control panel → Page 18
14
Door storage compartment
15
for large bottles → Page 20
Container divider → Page 20
16
17