Table of Contents
Advertisement
EN Incanto DOT.indd
+
-
22
Phase 9
Fit the rubber cap of the flange of the new
grinder motor.
Phase 10
Insert the sensor assembly removed from the
old grinder motor onto the flange of the new
grinder motor, taking care to align to with the
sensor insertion guides.
Phase 11
Completely secure the sensor by pushing the
unit right into its seat and pressing against the
flange to lock the sensor anchoring tab.
Phase 12
Proceed with wiring of the new grinder motor,
taking care to insert the black wire in connector
(-), and the white wire on connector (+).
18/05/2005, 12.05
22
Advertisement
Table of Contents
