Electrical Connection (4-wire)
(cont.)
Bare Wire Connection
Eyelet Connection
4
1
1
To make a bare wire connection, use holes on the left side
Feed supply cord up through hole in bottom
of the terminal block. To connect eyelet style wires, use
of range back.
holes on right side of terminal.
6
5
1
1
Attach line #1 (black) and line #2 (red)
Attach ground wire (green)
leads to outside terminal. Attach neutral wire (white)
with ground screw that was removed.
to center terminal on terminal block.
7
8
1
Reattach access door.
Push supply cord toward terminal
block to relieve strain, reattach supply cord strain
relief bracket over supply cord.
18