Electrical Connection (3-wire)
(cont.)
Bare Wire Connection
Eyelet Connection
4
1
1
1
To make a bare wire connection, use holes on the left side
Attach line #1 (black) and line #2 (red)
of the terminal block. To connect eyelet style wires, use
leads to outside terminal. Attach neutral wire (white)
holes on right side of terminal.
to center terminal on the terminal block.
6
5
1
Reattach access door.
Push supply cord toward terminal
block to relieve strain, reattach supply cord strain
relief bracket over supply cord.
16