Table of Contents
Advertisement
General Information
READ AND FOLLOW ALL WARNING AND
CAUTION INFORMATION WHEN
INSTALLING THIS APPLIANCE.
• All openings in the wall behind the appliance
and in the floor under the appliance must be
sealed.
• DO NOT obstruct the flow of combustion and
ventilation air.
CAUTION
Avoid any damage to oven vents. The vents
need to be unobstructed and open to provide
proper airflow for optimal oven performance.
CAUTION
The cooling fan should be operating when
the unit is in operation. If you notice the
cooling fan is not operating or you observe
unusual or excessive noise coming from the
cooling fan, contact a Viking Authorized
Service Center before continuing operation.
Failure to do so can result in damage to the
oven or surrounding cabinets.
Moving, Handling, and Unpacking
Remove and discard all packing materials,
including cardboard and tape on the outside and
inside of the range.
Range – DO NOT discard the anti-tip metal
brackets (2) supplied with the range. These are
the anti-tip devices and one must be installed
with the unit.
Type 1 is a wall mount device
which can be used for all
installation applications.
Type 2 is a floor mount device
which can be used for all
applications other than when
the range is installed on a
concrete sub-floor.
Important – The range MUST
be installed with one of the
anti-tip devices.
Refer to "Anti-tip Device
Installation"
section.
Some stainless steel parts may have a plastic
protective wrap which must be peeled off. The
interior should be washed thoroughly with hot,
soapy water to remove film residues and any
dust or debris before being used, then rinsed
and wiped dry. Solutions stronger than soap
and water are rarely needed.
12
Advertisement
Table of Contents
