Samson 3738-20 Mounting And Operating Instructions page 6

Firmware revisions
Firmware Revisions
1.20 Changes to parameter readings on the display
• P3 Verify LCD segments: TSTD reading (see section 8.2)
• P9 Automatic initialization: INIA reading (see section 8.7)
• P10 Manual initialization: INIM reading (see section 8.7)
• P11 End position calibration: REF reading (see section 8.9)
• P17 Start manual PST: PST reading (see section 9.2)
• P19 Testing contacts: TSTC reading (see section 9.3)
• P20 Testing solenoid valve: TSTS reading (see section 9.4)
• P21 Reset: RST reading (see section 8.10)
New status message F15
This status message is generated when the configuration mode SET is activated.
Changes to the partial stroke test (PST) (see section 9.2)
A canceled partial stroke test (PST) is logged with a time stamp in TROVIS-VIEW.
6 EB 8390 EN