Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
Media and Additional Parts
Description
Operator's Manual
Engine Operator's Manual
Parts Catalog
Operator Training Material
1
Checking the Tire Pressure
No Parts Required
Procedure
The tires are over inflated for shipping. Therefore,
release some of the air to reduce the pressure. The
correct air pressure for non-cab models is 103 kPa (15
psi) in the front tires and 172 kPa (25 psi) in the rear
tires. If a cab is installed on the machine, the front and
rear tires should be inflated to 172 kPa (25 psi).
2
Checking the Fluid Levels
No Parts Required
Procedure
1. Check the hydraulic fluid level before starting the
engine, refer to
Checking the Hydraulic System
(page
54).
Description
No parts required
No parts required
Qty.
–
–
Qty.
1
Read before operating the machine
1
Read before operating the machine
1
Use reference part numbers
1
View the video before operating the machine
2. Check the engine oil level before starting the
engine, refer to
(page
45).
3. Check the cooling system before starting the
engine; refer to
(page
50).
12
Use
Check the tire pressure.
Check the hydraulic fluid, engine oil,
and coolant levels.
Use
Checking the Engine-Oil Level
Checking the Cooling System