Biostar TB150 PRO Manual page 15

PANEL1: Front Panel Header
This 16-pin header includes Power-on, Reset, HDD LED, Power LED, and speaker connection.
SATA3_1/3_2/3_3/3_4/3_5/3_6: Serial ATA Connectors
These connectors connect to SATA hard disk drives via SATA cables.
» When using SATA SSD module on PCIE-M2 slot, the PEX16_2 slot
and SATA3_1 port will be disabled.
JFRONT_USB3_1: Header for USB 3.0 Ports at Front Panel
This header allows user to add additional USB ports on the PC front panel, and also can be
connected with a wide range of external peripherals.
Pin Assignment Function
1 +5V
2 N/A Speaker
Connector
3 N/A
4 Speaker
5 HDD LED (+) Hard drive
LED
6 HDD LED (-)
7 Ground Reset
button
8 Reset control
Pin Assignment
1 VBUS0
2 SSRX1-
3 SSRX1+
4 Ground
5 SSTX1-
6 SSTX1+
7 Ground
8 D1-
9 D1+
10 ID
Chapter 2: Hardware Installation | 15
TB150 PRO
Pin Assignment Function
9 N/A
N/A
10 N/A
11 N/A N/A
12 Power LED (+)
Power
13 Power LED (+)
LED
14 Power LED (-)
15 Power button Power-on
button
16 Ground
Pin Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
7 Ground
Pin Assignment
11 D2+
12 D2-
13 Ground
14 SSTX2+
15 SSTX2-
16 Ground
17 SSRX2+
18 SSRX2-
19 VBUS1
20 Key