Table of Contents
Advertisement
DCS-2500TN
OPERATION
Starting the Unit
When starting the unit, observe the precautions described in the
section "For safe use of your product" to ensure that you
operate the product correctly. Failure to do so might cause
serious personal injury.
1.
Fill the chain oil tank
with lubricant.
2.
Remove the guide
bar cover.
3.
Make sure the guide
bar and saw chain
are not touching
anything when
starting the chainsaw.
4.
Push front hand
guard (A) forward to
engage chain brake.
5.
Push power button (B) once to turn on power to unit.
Note: Power indicator LED (C) blinks when power to unit is turned
on with chain brake engaged.
6.
Pull front hand guard rearward to disengage chain brake.
Note: Power indicator LED (C) remains lit when power to unit is
turned on with chain brake disengaged.
7.
Hold the chain saw by both handles.
8.
Hold down the trigger switch lockout (D) and depress trigger switch (E)
to increase saw chain speed. If you depress trigger switch with chain
brake activated, the saw will not work.
When power to unit is turned on:
• After 90 seconds of inactivity, unit will power itself off.
X7508220500
© 7/23 ECHO Incorporated
A
B
C
E
OPERATION
D
37
Advertisement
Table of Contents
