Echo DCS-2500TN Operator's Manual page 34

ASSEMBLY
1. Plug charger AC cord in the
wall outlet.
2. Align ridges on battery with
grooves on charger, and slide
battery into charger.
3. During normal charging, the
charger LED (A) will blink
GREEN.
If charger detects a problem, LED will blink RED. Remove battery
from charger, clear obstructions from contacts and reinstall battery
into charger. If battery is outside acceptable temperature range (See
Recommended Ambient Temperature chart) LED will remain RED.
4. When charging is complete,
LED will remain GREEN. See
battery manual for charging
time.
5. Verify battery is fully charged.
Remove battery from charger,
press battery charge status
button (B), and check LED
display.
• One green light indicates that
the battery has 1-24% charge.
• Two green lights indicate that
the battery has 25-54% charge.
• Three green lights indicate that the battery has 55-79% charge.
• Four green lights indicate that the battery has 80-100% charge.
6. Unplug charger AC cord from the wall outlet.
34
A
B
© 7/23 ECHO Incorporated
DCS-2500TN
X7508220500