Echo DCS-2500TN Operator's Manual page 22

SAFETY
Transport of the product
When transporting in the situations described below, turn off the unit and
ensure that the saw chain has stopped moving, then fit the guide bar
cover. Do not carry unit with the power indicator LED illuminated.
• Moving to the place where you are working
• Moving to another area while you are working
• Leaving the place where you have been working.
Failure to observe these precautions could cause serious injury.
Orient guide bar to the rear when carrying chainsaw.
When transporting the product by vehicle, fit the guide bar cover, and
secure the product firmly in place to prevent it from moving around
Secure the unit against unintentional startup. Remove the battery from the
unit before transporting or storing the unit. Do not use metal containers for
transporting batteries.
Starting the unit
Be particularly careful to observe the following precautions when starting
the unit:
• Always ensure all handles and guards are fitted. Keep the handles dry,
clean, and free of oil.
• Check that none of the nuts and bolts are loose.
• Check that the guide bar is not damaged or excessively worn. If you find
any abnormalities, do not use the product.
• Operate the chainsaw only in well-ventilated areas. Oil mist (from chain
saw lubrication) or saw dust is harmful to health.
• Leave plenty of space around the product and do not allow people or
animals near it.
• Never operate a chainsaw when you are alone. Arrange to have someone
remain within calling distance in case you need help.
• Remove obstructions, if any.
• Make sure that the saw chain is not touching the ground or any obstacles.
22
DCS-2500TN
X7508220500
© 7/23 ECHO Incorporated