Residual Risks; Getting To Know The Machine; Description Of The Machine And Planned Use - Stiga BLA 24 Li Operator's Manual

of packaging, deteriorated
parts or any elements with
a strong environmental
impact; this waste must not
be disposed of as normal
waste, it must be separated
and taken to specified waste
disposal centres where the
material will be recycled.
• Scrupulously comply with
local regulations for the
disposal of waste materials
• When the machine is
withdrawn from service, do not
dump it in the environment,
but take it to a waste disposal
facility in accordance with the
local regulations in force.
Do not throw electrical
equipment away with
domestic waste. According
to the European Directive
2012/19/EU on electrical and
electronic equipment waste and
its implementation in compliance
with national standards, old
electrical equipment must be
collected separately, for eco-
compatible recycling. If electrical
equipment is disposed of in a
landfill or in the ground, the
harmful substances can reach
the water table and enter the
food chain, damaging your
health and well-being. For further
information on the disposal of
this product, contact your dealer
or a domestic waste collection
service.
At the end of their working
life, dispose of batteries
paying due attention to the
environment. Batteries
contain material classified as
hazardous for you and the
environment. They must be
removed and disposed of
separately at a facility that
accepts lithium-ion batteries.
separate waste collection
of the products and
packaging used allows the
materials to be recycled
and reused. Reuse of recycled
materials help to prevent
environmental pollution and
reduces the demand for raw
materials.

2.7 RESIDUAL RISKS

Even all the safety rule are
obeyed, there still can be a
certain residual risk, which
cannot be excluded. From the
kind and construction of the
tool the foreseeable potential
endangerments can be:
• Hurled materials that
may injure the eyes;
• Damage of the hearing, if no
protection of the ears is carried.

3. GETTING TO KNOW THE MACHINE

3.1 DESCRIPTION OF THE MACHINE
AND PLANNED USE
This machine is a garden tool, specifically a
portable battery-powered garden blower.
It basically consists in a motor that
activates a rotor which is able to
produce a high-speed air flow.
3.1.1 Intended use
This machine was designed
and manufactured for:
• the movement and accumulation, by
blowing, of leaves, grass, debris of various
limited weight and modest dimensions.
EN - 6