Manuals and S
and Service Updates
6.3.
Parameters Restore
Restore
At any time is possible to restore the original parameter list that was loaded
At any time is possible to restore the original parameter list that was loaded
At any time is possible to restore the original parameter list that was loaded
into the controller via USB key
into the controller via USB key (see chapter 4.6.9 Software Update
(see chapter 4.6.9 Software Update - only
parameters). Press PARAMETERS RESTORE.
Press PARAMETERS RESTORE.
Press the green checkmark to confirm.
Press the green checkmark to confirm.
Wait until the screen returns to the main service options.
Wait until the screen returns to the main service options.
69
Rev08/04/2015
69