Password - U-Line UCBF659-SS12A User Manual

4.6.5.

Password

The Password can be changed from the factory default or a password can be
set by the chef to protect the recipes.
WARNING: If the password is changed or a chef's password is set up,
the factory cannot access this control if diagnostic service is required.
You must secure the password in a safe place, otherwise if it is lost,
the software must be reloaded and all saved recipes will be lost.
To set a new password, select which type of password you wish to enter,
ENTRY or Chef, that tab will be highlighted. Enter the password you have and
hit ok. Once this action is performed, you will be the only one to access the
control.
38
Rev08/04/2015
38