Memory Configuration - Gigabyte S183-SH0-AAJ1 User Manual

5-3-4 Memory Configuration

Parameter
Integrated Memory Controller (iMC)
Enforce DDR Memory Frequency POR
Memory Frequency
Enable ADR
Legacy ADR Mode
Minimum System Memory Size
ADR Data Save Mode
Assert ADR on Reset
Description
When set to Enable, the system enforces Plan Of Record restrictions
for DDR frequency programming.
Options available: POR, Disable. Default setting is POR.
Configures the maximum memory frequency. If Enforce POR is
disabled, user will be able to run at higher frequencies than the
memory support (limited by processor support).
Default setting is Auto.
Enables the detecting and enabling of ADR (Asynchronous DRAM
Refresh) function.
Options available: Enable, Disable. Default setting is Enable.
Enable/Disable the Legacy ADR Mode.
Options available: Enable, Disable, Auto. Default setting is Auto.
Configures the minimum memory size.
Options available: 2GB, 4GB, 6GB, 8GB. Default setting is 2GB.
Specifies the Data Save Mode for ADR. Batterybacked or Type 01
NVDIMM.
Options available: Disable, Batterybacked DIMMs, NVDIMMs, Copy
to Flash. Default setting is NVDIMMs.
Enable/Disable Assert ADR on Reset.
Options available: Enabled, Disabled. Default setting is Disabled.
BIOS Setup
- 76 -