Removing And Installing The Chassis Cover - Gigabyte S183-SH0-AAJ1 User Manual

3-1

Removing and Installing the Chassis Cover

Before you remove or install the system cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove the chassis cover:
1. Unlock the plastic handle and pull the grip handle to open the panel cover.
2. Slide the cover to the rear of the system and then remove the cover in the direction indicated by the
3. arrow.
4. To reinstall the chassis cover follow steps 1-4 in reverse order.
2
1
System Hardware Installation
- 25 -
3