Removing And Installing A Memory Module; Memory Population Table - Gigabyte S183-SH0-AAJ1 User Manual

3-6-2 Removing and Installing a Memory Module

Before installing a memory module, make sure to turn off the computer and unplug the power cord
from the power outlet to prevent damage to the memory module. Be sure to install DDR5 DIMMs on
to this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.

3-6-3 Memory Population Table

Ranks Per DIMM
Type
RDIMM
RDIMM 3DS
NOTE:
1.1DPC applies to 1SPC or 2SPC implementations (SPC - Sockets Per Channel)
2. 24Gb XCC only w/ limited configs: 1DPC all DIMM types, 2DPC 96GB only. Only 8 and 16 DIMM configs, no fallbacks.
2
DIMM Capacity (GB)
and Data Width
16Gb
SRx8 (RC D) 16GB
SRx4 (RC C) 32GB
SRx4 (RC F) 9x4 32GB
DRx8 (RC E) 32GB
DRx4 (RC A) 64GB
DRx4 (RC B) 9x4 64GB
(4R/8R)x4 2H-128GB
(RC A) 4H-256GB
System Hardware Installation
1
Speed (MT/s); Voltage (V);
DIMM per Channel (DPC)
1DPCN
2
24Gb
24GB
48GB
NA
48GB
4800
96GB
NA
NA
- 32 -
2
1
2DPC
1.1V
4400