8.
Reinstall hinge assembly on opposite side
Flip over the inner door to the left. Using a T20
reinstall the hinge assembly on the opposite side from which it
was removed.
DOORS WITH ELECTRICAL WIRING:
9.
Remove rotating assembly
Lift off inner door assembly. Using a Phillips screwdriver , remove
the two screws securing the rotating assembly to the door .
26
10.
screwdriver ,
®
Reposition rotating assembly and tubing 180° to opposite side of
the door.
11.
Rotate bottom of assembly 180° towards you and secure
assembly with the two screws removed earlier , using a Phillips
screwdriver . Press tubing into indents.
IMPORTANT: Make sure to swing hinge down in front of rotating
assembly (see Step 12).
Reposition rotating assembly
and tubing
Rotate assembly bottom and fasten
in place
Press tubing
into indents.