Maytag MHW5630HW Installation Instructions Manual page 49

4.
Remove inner door from outer door
T op of
door
Position the door with the inside of the door facing up. Using
a Phillips screwdriver , remove the 10 screws securing the inner
door to the outer door .
5.
Remove hinge
Using a T20 screwdriver , remove the six screws holding the
®
hinge assembly in place.
6.
Remove latch
Thick section
Flip and rotate the inner door 180° so that the thin section is
at the top and the thick section is at the bottom. Using a T25
screwdriver , remove the four screws securing the latch plate in
place.
7.
Reinstall latch on opposite side
Hinge
Using a T25
side from which it was removed with the four screws removed
earlier .
Thin section
screwdriver , reinstall the latch plate on the opposite
®
Latch
®
25