Maytag MGD8630HC Installation Instructions Manual page 49

4.
Remove inner door from outer door
Top of
door
Position the door with the inside of the door facing up.
Using a Phillips screwdriver, remove the 10 screws securing
the inner door to the outer door.
5.
Remove hinge
Using a T20 screwdriver, remove the six screws holding the
®
hinge assembly in place.
6.
Remove latch
Thick section
Flip and rotate the inner door 180° so that the thin section is
at the top and the thick section is at the bottom. Using a T25
screwdriver, remove the four screws securing the latch plate
in place.
7.
Reinstall latch on opposite side
Hinge
Using a T25
opposite side from which it was removed with the four screws
removed earlier.
Thin section
screwdriver, reinstall the latch plate on the
®
Latch
®
25