Table of Contents
Advertisement
6 - INSTALLATION
6.5 - JUXTAPOSE FUNCTION sealed junction special features
WARNING:
For a unit with the side-by-side plate heat exchanger function;
ASSEMBLY MUST START WITH THE TWO BLOCKS OF THE SIDE-BY-SIDE PLATE HEAT EXCHANGER FUNCTION.
The other blocks which make up the system will be assembled afterwards.
Connecting the blocks:
To guarantee the tightness between the flows. Apply a PVC seal to one of the two blocks before bringing together and assembling.
1 - Position of the gasket: on the leakage partition wall returns
2 - Bringing together
3 - Internal attachment points, between blocks > 8 mm D bolts X 6
B
C
D
24
D
B
C
E
F
G
Advertisement
Table of Contents
