Table of Contents
Advertisement
Descale the appliance.
•
Prepare a solution of 450ml of water and 50ml of liquid descaling
agent
•
Pour the solution into the water container drawer
•
Press OK to start the P10S programme
NOTE: During the descaling programme, you will need to drain water
from the steam system 3 times.
Drain the descaling solution from the system when you hear a beep and
steam indicator is flashing.
•
Open the oven door
•
Place the deep baking tray under the water drain
•
Press OK to drain the remaining descaling solution from the steam
system. Pour the solution out of the baking tray and rinsewith water
To rinse the steam system, pour 0.5l of clean water into the water
container drawer and touch OK to continue the steam programme.
Drain the descaling solution from the system when you hear a beep and
steam indicator is flashing.
•
Open the oven door
•
Place the deep baking tray under the water drain
•
Press OK to drain the remaining descaling solution from the steam
system. Pour the solution out of the baking tray and rinse it with water
IMPORTANT: If water is dripping from the drain tube during the steam
programme, flush the system.
In the active oven mode without the function enabled:
•
Place at least 1l container under the drain
•
Pour 0.5l of water into the water container drawer
•
Simultaneously touch
•
Repeat this procedure twice. If the problem persists, run another
descale programme
20 | Instruction Manual
and OK, drain water out of the system
Advertisement
Table of Contents
