Table of Contents
Advertisement
You first need to set the duration. The display will show
, then
touch and hold the
sensor again and the minute minder, the
symbol will flash on the display. Next, touch the
sensor twice, and
the
pictogram will flash on the display. The display will show the
end time (start time + duration). Now use
to set the end time before
touching
to confirm.
Once the end time is confirmed, the
and
indicators light up
steadily and the current time is shown again.
Use
/
to adjust the Start Time. Touch to confirm the adjusted
setting. To cancel timed operation use
to adjust duration down to
the lowest possible value and touch
to confirm. When the oven is
turns on automatically, the
symbol will go out.
When the duration has elapsed, you will hear beeping. Touch any
sensor to mute the beeping. The beeping stops, the function settings
and temperature are cleared and lighting will turn on for 30 s. The
symbol will go out. The appliance will turn off after another 60
seconds.
12 | Instruction Manual
Advertisement
Table of Contents
