Table of Contents
Advertisement
DEFAULT TX
HEADER
Utility Menu
All manuals and user guides at all-guides.com
Settings
Select the desired method for sending docu-
ments.
MEMORY TX: With this method, the fax
transmission starts after the entire docu-
ment is scanned and stored in the mem-
ory. The total number of pages is
automatically printed with the page num-
ber in the header. However, the memory
may become full if there are many pages
in the document or if the data is large due
to the fine image quality (resolution).
DIRECT TX: With this method, the trans-
mission is performed in real time in the
transmission sequence of the destina-
tions. If there are many pages in the doc-
ument, the fax can be sent with this
method without the memory becoming
full.
To change the method for sending documents
during transmission from the default setting
specified here, refer to "Memory Transmission
and Direct Transmission" on page 52.
Settings
Select whether or not to print transmission
source information (date/time of transmission,
sender's name, sender's fax number, session
number and page number) for the machine in
the transmitted document.
MEMORY TX / DIRECT TX
OFF / ON
If
in the USER
PTT SETTING
SETTING menu is set to
and
CANADA
KOREA
cannot be changed.
,
U.S.A
, the settings
29
Advertisement
Table of Contents
