Miele TDB130WP Eco Operating Instructions Manual page 10

Heat pump dryer
Table of Contents

Advertisement

Warning and Safety instructions
Heat pump technology and refrigerant:
The heat pump in this tumble dryer uses a refrigerant which is con-
densed by the compressor and led in a closed circuit through the
heat exchanger unit where heat exchange with the circulating drying
air takes place.
– The humming noises caused by the heat pump during the drying
process are normal and do not impair the efficient functioning of
the dryer.
– The refrigerant is not flammable or explosive.
– In general it is not necessary to leave the dryer standing for any
length of time after it has been installed provided it has been
transported correctly (see "Installation and connection").
If it has not been transported as described, ensure that the re-
commended standing time prior to first operation is observed.
Otherwise the heat pump can be damaged.
– This tumble dryer contains fluorinated greenhouse gases (F-Gas).
They are hermetically sealed.
Designation of refrigerant: R134a
Amount of refrigerant: 0.34 kg
Global warming potential of refrigerant: 1430 kg CO
Global warming potential of appliance: 486 kg CO
10
e
2
e
2

Advertisement

Table of Contents
loading

Table of Contents