Loewe Connect 42 Full-HD+ 100 Operating Instructions Manual page 59

Operating additional equipment
Open folder
➠ Folders will only be displayed if they were created on the
memory card / USB stick.
Mark a folder in the photo overview.
OK Open folder.
The photos in this folder are displayed.
OK
USB 1:\Folder _1\
OK Open folder
Marking photos for slide show
Mark the photos that you want to display in a slide show.
Navigate to a photo.
USB 1:\Folder_1\picture_017.jpg
View picture
OK
Unmark picture
Blue button: Mark photo for slide show.
Start slide show
➠ No pictures are marked: All photos of the folder that
was just opened will be displayed.
➠ Photos marked: Only marked photos will be displayed.
PLAY button: Start / continue slide show.
OK calls the photo overview.
PAUSE button: Pause / continue the slide show.
Yellow button: Zoom picture (only in pause mode).
Rotate picture to left/right in 90º steps (only in
Pause mode).
 or P+ Next photo.
 or P– Previous photo.
STOP button: End slide show.
Downloaded From TV-Manual.com Manuals
29 pictures
Slide show
END
P+
VFUROO 
MENU INFO
P–
OK
29 pictures
Slide show (marked pictures)
END
P+
VFUROO 
MENU INFO
P–
Calling the PhotoViewer menu
In the PhotoViewer menu you can make picture settings and select the
memory medium.
➠ The photo overview is displayed.
Call PhotoViewer menu.
Ordner_1
OK
PhotoViewer menu
Go to ...
Picture 001
Explanations of the setting possibilities:
Go to... Within the folder select a photo directly or go to the
beginning or end of the folder.
Picture display With Optimum size the photo is reduced or enlarged in
size so that the screen is optimally filled.
With Original resolution each pixel of the photo represents
one pixel on the screen. If the photo resolution is higher
than that of the screen, then portions of the photo will
be cropped.
Picture change Set the display time per photo in a slide show to between
3 and 60 seconds.
The loading time of the photo depends on the photo size,
the number of saved files and the transmission speed of
the memory medium. Therefore a photo change may
take longer than specified.
Picture There is a choice of four different photo transitions for
crossovers changing slides. You can also have the photo transitions
run in sequence.
Photo info Display additional information about the picture: Recording
time and date, resolution and picture size.
Picture settings Set picture adjustment, contrast, colour intensity, colour
temperature, brightness, sharpness, DNC.
Sound Select whether or not the previously heard sound is to
be heard during the PhotoViewer operation.
Select memory Select memory medium from which the photos are to be
medium reproduced. This menu item is only displayed if at least
two memory media are available.
INFO
Picture display Picture change Picture crossovers
...
END
59 -