Adjusting The Picture - Loewe Connect 42 Full-HD+ 100 Operating Instructions Manual

Daily operation

Adjusting the picture

Call TV menu.
 Select Picture,
 go to the menu line below.
TV menu
Picture
Picture adjustment
Presettings (TV digital)
Select the desired picture function,
 go to the menu line below.
 Make changes.
Explanations of the picture settings:
Picture Switches the picture parameters between personal set-
adjustment tings and energy efficiency presettings.
Contrast Adjust contrast.
The power consumption of the TV set is directly depend-
ent on the value set here (see also page 13).
Colour intensity
Adjust the colour.
Colour Set warmer or colder tone for picture.
temperature
Brightness
Adjust the brightness of the picture.
Sharpness Adjust the contour sharpness of the picture.
DNC Removes or reduces the signal noise in the picture.
more ... Call with OK.
Image + Active Picture improvement on/off and demo mode for Image +
Active.
Picture format Set picture format (see right hand column).
Move picture Move picture vertically (see page 23).
up/down
Auto format Automatic detection and setting of the picture format for
Cinemascope or widescreen movies.
DMM Reduce jolting.
Automatic The TV picture adapts to the ambient brightness.
dimmer The energy consumption of the set is reduced by contrast
reduction in a lower ambient brightness. The contrast
and energy consumption increase with a high ambient
brightness.
Downloaded From TV-Manual.com Manuals
- 22
INFO END
Contrast Colour intensity Colour temp
...
Presettings / Personal settings for picture adjustment
Call TV menu.
 Select Picture,
 go to the menu line below.
 Select Picture adjustment,
 go to the menu line below.
TV menu
Picture
Picture adjustment
Presettings (TV digital)
Eco standard
 Select Presettings or Personal settings.
 For presettings, go to the menu line below.
 Select the desired presetting for the picture.
OK Confirm selection.
Explanations for Picture adjustment:
Custom adjustments of contrast, colour intensity, colour temperature,
brightness, sharpness and digital noise control are saved in the Personal
settings. Every signal source has its own personal settings.
By selecting Presettings the picture settings for the respective currently
active signal source are set to predefined values.
For an explanation of the signal sources see glossary: Signal input groups.
In the index of the TV set, all the picture and sound adjustments can be
reset to the factory values for all signal sources in one step under Reset
picture/sound or Factory settings picture/sound.
Selecting the picture format
Press the Picture format button until the desired picture
format is set or press
Picture format
16:9
 to select the desired picture format.
The Panorama picture format can be set between
proportionally correct and format filling display. Black
bars are visible on the left and right of the picture in
the proportionally correct display.
Switch: Keep the M button on the TV pressed, at the
same time, press the Picture format button on the remote
control briefly.
Reset: Press the same button combination again.
INFO END
Personal settings (TV digital)
...
4:3 Panorama Cinema Zoom
p
continued on next page