Subaru Outback 2012 Manual page 230

! Deleting device
1. Press the talk switch
"Delete audio player".
2. Press the talk switch
3. Say the name of the device, or "List
audio player" and select the device (for
details, refer to "List audio player function"
F5-46).
4. Press the talk switch
5. Say "Confirm" to delete the device, or
say "Go back" to go back.
– If the device is deleted, "Deleted."
will be displayed.
! By operating the dial
Select the menu by turning and pressing
the "TUNE" dial.
NOTE
. Select the "Go Back" menu to go
back to the previous menu.
. If no devices are registered, you can
only select from the following menu.
– "Pair Audio Players" to register
the device (refer to "Registering
(paring) device" F5-47)
– "Set Passkey" to set a new
passkey (refer to "Setting passkey"
F5-48)
! Registering (paring) device
1. Select the "Pair Audio Players" menu.
and say
2. Select the "Record Name" menu.
.
3. Say the name of the device to be
registered.
4. Select the "Confirm pair audio?" menu.
– The passkey will then be shown on
the display.
.
5. Input the passkey into the device.
– If the registering procedure is fin-
ished, "Audio Players Paired." will be
displayed.
– If the registering procedure was not
successful, "Unable to pair audio
players." will be displayed.
! Selecting device
1. Select the "Select Audio Player" menu.
2. Select the preferred device.
3. Select the "Confirm select audio
player?" menu.
4. Select the "From Car" menu or "From
Audio Player" menu.
5. Select the "Confirm select audio
player?" menu.
– If the device is connected, "Se-
lected" will be displayed.
– If the device cannot be connected,
"Failed" will be displayed.
Audio
! Changing the registered name
1. Select the "Change Name" menu.
2. Select the preferred device.
3. Select the "Record Name" menu.
4. Say the new name.
5. Select the "Confirm name change?"
menu.
– If the name is changed, "Device
name has been changed." will be
displayed.
! List audio player function
For details about the list audio player
function, refer to "List audio player func-
tion" F5-46.
1. Select the "List Audio Players" menu.
– The names will then be spoken.
2. Press the talk switch
name is being spoken to select the device.
– After the talk switch is pressed,
"Audio player selected." will be dis-
played.
3. Select from the following menu.
. "Select Audio Player" (refer to "Se-
lecting device" F5-47)
. "Change name" (refer to "Changing
the registered name" F5-47)
. "Delete Audio Player" (refer to "De-
leting device" F5-48)
– CONTINUED –
5-47
while the