Type B Inside Mirror (If Equipped) - Subaru Outback 2012 Manual

3-36
Instruments and controls
& Type B inside mirror (if
equipped)
1) Electronic compass display
2) Rear view image display
3) HomeLink button 1
®
4) HomeLink button 2
®
5) Function indicator
6) HomeLink button 3
®
7) Photosensor
8) Power button
9) Compass button
The mirror has the following features.
. Auto-dimming function for anti-glare
capability
. Rear view image display
. Electronic compass display
. HomeLink
Wireless Control System
®
Using the power button and compass
button, you can display the various func-
tions of the rear view image display and
the electronic compass display based on
how long you press the buttons.
Power button
Period of
Gear
time button
position
is pressed
Except Briefly
Auto-dimming
R (reverse)
function ON/OFF*
R (reverse) Briefly
Rear view image
display: ON/OFF*
mode
6 to 12
Enter the lan-
seconds
guage selection
mode
12 to 15
Rear view image
seconds
display: opera-
tional/non-opera-
tional mode
*: The setting returns to "ON" as a default
setting every time the ignition switch is turned to
the "OFF" position.
Compass button
Gear
position
Except
R (reverse)
Function
displayed
! Auto-dimming function
The auto-dimming function is an anti-glare
capability which automatically reduces
glare coming from headlights of vehicles
behind you.
By pressing the power button, the auto-
dimming function is toggled on or off.
When the auto-dimming function is on, the
function indicator will illuminate in green.
Even with the mirror in anti-glare mode,
the mirror surface turns bright if the
transmission is shifted into the "R" (re-
verse) position. This is to ensure good
rearward visibility during reversing.
Period of
Function
time button
displayed
is pressed
Briefly
Electronic com-
pass display ON/
OFF
3 to 6
Enter the com-
seconds
pass zone setting
mode
6 to 9
Enter the com-
seconds
pass calibration
mode