Defrosting; Preset - Silvercrest 90090 Operating Instructions Manual

Defrosting

This function enables you to defrost meat, poultry and
fish with ease. The defrosting time and the power level
are calculated and set automatically once you have
entered the weight.
1. Press button Defrosting 8
In the display 1 appears
The symbol blinks.
2. Using the control dial q enter in the weight of
the foodstuff to be defrosted. You can enter in
a weight of between 100 g and 1800 g.
3. Press button Start/Quickstart q
The appliance calculates the defrosting time auto-
matically. It appears in the display 1 and starts to
countdown.
After about 1/2 the time you hear a signal tone
and "turn" appears in the display 1. Open the
door and turn the food over. Close the door and
press the Start/Quick Start q
the defrosting process.
Notice!
If you wish to dispense with turning, simply wait for
the signal tones to finish. The defrosting programme
will continue despite the signal tone!

Preset

With this programme you can preset a specific start
time for the cooking or grilling of the foodstuff. If the
programming is carried out correctly, the appliance
starts automatically at the programmed time.
Notice!
The clock must be correctly set to be able to select
the function "Preset".
.
and .
.
button to continue
- 18 -
1. Programme in the required microwave function
(cooking, grilling or automatic-menu (except
auto-programme 6):
For microwave operation: Press the button Opera-
tion r the appropriate number of times to
set the required power level. Programme the
cooking time with the rotary switch q.
For grill operation: Press the button Grill 6
to activate the grill function.
Set the desired grilling time using the control
dial q.
For automatic-menu: Using the control dial q
select the appropriate programme for your food-
stuff (excluding auto-programme 6).Confirm your
selection by pressing the Start/Quickstart button
. Now set by, by rotating the control
q
dial q, the desired weight resp. the desired num-
ber of servings.
2. Press the Preset button 7
display 1 "01:" blinks and the hour-glass sym-
bol appears.
3. Turn the control dial q to programme the hours.
4. Press the button Start/Quickstart q
minute figures appear.
5. Turn the control dial q to programme the minutes.
6. Press the button Start/Quickstart q
hour-glass symbol
shown. The microwave oven automatically starts
the cooking process at the programmed time.
A signal tone sounds when it starts.
Notice!
To erase the saved start time and thus cancel the
saved procedure, press the Stop button 0
The hourglass symbol
displayed.
. In the
, now the
. The
blinks. The start time is
disappears and the time is
.