Digital Temperature Control Adjustments - True TAC-14GS-LD Installation Manual

True Food Service Equipment, Inc.
TAC DIGITAL TEMPERATURE CONTROL
OPERATION
Digital Temperature Control Commands
Each LED function is described in the following table.
KEY COMBINATIONS
To lock & unlock the keyboard.
To lock & unlock the keyboard.
To lock & unlock the keyboard.
HOW TO SEE THE MINIMUM TEMPERATURE:
1. Press and release the key.
2. The "Lo" message will be displayed
followed by the minimum temperature
recorded.
3. By pressing the key or waiting for 5
seconds the normal display will be restored.
HOW TO SEE THE MAXIMUM TEMPERATURE:
1. Press and release the key.
2. The "Hi" message will be displayed
followed by the maximum temperature
recorded.
3. By pressing the key or waiting for
5s the normal display will be restored.
13
INSTALLATION / OPERATION INSTRUCTIONS
Use of LED
............ www.truemfg.com ............
HOW TO RESET THE MAXIMUM AND MINIMUM TEMPERATURE
RECORDED:
To reset the stored temperature, when maximum or minimum
temperature is displayed:
1. Press SET key until "rST" label starts blinking.
HOW TO SEE AND MODIFY THE SET POINT:
1. Push and immediately release the SET
key: the display will show the Set point
value;
2. The SET LED start blinking;
3. To change the Set value push the or
arrows within 10 seconds.
TO START A MANUAL DEFROST:
1. Push the Defrost key for more than 2
seconds and a manual defrost will start.
HOW TO LOCK THE KEYBOARD:
1. Keep the and keys pressed
together for more than 3 seconds.
2. The "POF" message will be displayed
and the keyboard is locked. At this
point it is only possible to view the set
point and the MAXIMUM OR MINIMUM
temperatures stored.
TO UNLOCK THE KEYBOARD:
1. Keep the and keys pressed together for
more than 3 seconds.
2. The "PON" message will be displayed and the
keyboard is unlocked.
13