ViewSonic V1100 User Manual page 31

4
Locate the memory expansion slot cover on the back of the Tablet PC shown
below. Remove the screw. Lift the memory door off the system.
Memory Expansion Slot Cover
Attention: Notice the notch on the extracted module. The notch's off-center
placement allows the module to fit into the socket only in one orientation.
The replacement module will be similarly notched to help you place it
properly into its slot.
5
To install the new module, place it into the memory socket. The module will
only fit in one orientation. Insert the module at an angle of approximately 30
degrees into the empty memory socket. Then press it firmly so that the
contact edge is driven fully into the receiving socket.
Figure 11: Installing a Memory Module
6
Pivot the module until the latches on both sides of the socket snap into place.
(You will feel it solidly click into place.)
7
Replace the Memory Slot Cover and the Retaining Screw. You have now
completed the memory upgrade.
Screw
ViewSonic Tablet PC V1100 27