Sony DVP-NS999ES Operating Instructions Manual page 28

Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
C
Logic) decoder and 3 to 6 speakers
You can enjoy Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use
C-2
DIGITAL OUT
PCM/ DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital
input
[Speakers]
Rear (L) Rear (R)
l: Signal flow
z Hint
For correct speaker location, refer to the operating
instructions of the amplifier (receiver).
28
CD/DVD player
DIGITAL OUT S-LINK AUDIO OUT 5.1CH OUTPUT
1 2 FRONT REAR CENTER
CONTROL S
PCM/ DTS/
L
IN
DOLBY DIGITAL
L
COAXIAL OPTICAL
R
WOOFER
R
2 2 Y P P
B R SELECTABLE
INTERLACE
PROGRESSIVE
1 1
SCAN SELECT
VIDEO S VIDEO
OUT OUT
COMPONENT VIDEO OUT
Coaxial digital cord
(not supplied)
Amplifier (receiver) with Dolby
Surround decoder
Subwoofer
.
C-2
COMMAND MODE
1 2 3
Stereo
audio cord (not
supplied)
or
or
(white)
Center
Notes
• When connecting 6 speakers, replace the
monaural rear speaker with a center speaker, 2
rear speakers, and a subwoofer.
• Super Audio CD audio signals are not output from
the digital jack.
. If your amplifier
C-1
C-1
AUDIO OUT
(white)
1
L
(red)
R
to AUDIO OUT L/R 1 or 2
(red)
to audio input
[Speakers]
Front (L)
Rear (mono)
2
Front (R)