Sony DVP-NS999ES Operating Instructions Manual page 22

A If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 26). (Do this if you are
connecting to a TV only.)
B If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images. If your TV accepts progressive
(480p) format signals, you must use this connection and set "COMPONENT OUT" to
"PROGRESSIVE" in "SCREEN SETUP" (page 78).
z Hint
If your TV has an S-LINK (CONTROL S) jack, you can control the player by operating the remote toward
the TV. This feature is convenient when you placed the player and the TV away from each other. After
connecting the player with other components according to the above A, B, or C, connect the TV via the
S-LINK/CONTROL S IN jack using an S-link (control S) cord (not supplied). Refer to the instructions
supplied with the TV to be connected.
Notes
• Do not connect a VCR, etc. between your TV and the player. If you pass the player signals via the VCR,
you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack,
connect the player to this jack.
22
Yellow (Video)
White (L)
Red (R)
Green
Blue
Red
Yellow (Video)
White (L)
Red (R)
, P )
B R
Green
Blue
Red