Westinghouse WH100P Operation Manual page 5

Operating Instructions
5
First, align the four pins on the Front Cover with the four holes on the unit. Then, slightly push the
Front Cover, the magnetic parts will attract the Front Cover towards to unit body. The installation
of Front Cover is completed.
ATTENTION
Please make sure all the Filters are fully installed.
Control Panel Buttons:
Reduce Button
Display Screen
*Unit supports 2.4Ghz / 5Ghz Wifi. If there is any connection problem, please contact your router
supplier for problem solution.
1. Power Button
ON: Sound should be heard indicating Power On after the unit has been connected with
power supply. Press ON / OFF Button to turn on unit.
OFF: Press ON / OFF Button again to turn off unit.
Note: When the unit is running, long press the button to reset WIFI Mode.
07
Getting Started
Air Speed Air Speed Eco Mode ON / OFF
Increase Button Button Button
Operating Instructions
2. Default Air Speed& Memory Function
Default Setting: The default air speed is at '03'. Every time the unit got disconnected from power
supply, when it's turned back on, the air speed will be reset to default value.
Memory Function: If user presses the ON / OFF Button to turn off the unit and then turns it
back on, the unit would remain the same operation status as last usage.
3. Fan Speed Mode
Increase Speed
Increase Speed: Press the Increase Speed button, and each click will increase the fan speed.
Reduce Speed: Press the Reduce Speed button, and each click will reduce the fan speed.
4. Turbo Mode
When the air speed is at '10', simultaneously press the Air Speed Increase Button and Air
Speed Reduce Button to enter into 'SS' Mode.
It is recommended to select 'SS' mode to treat seriously contaminated area in a short period
of time.
Exit the 'SS' Mode: Press the Air Speed Reduce Button to switch into Air Speed Mode with air
speed at '10'.
Getting Started
Reduce Speed
08