Page 1
Operation Manual Model: WH100P WARRANTY CARD ATTACHED Thank you for choosing Westinghouse NCCO Air Treatment Unit. Before using and maintaining this appliance, please read this manual carefully and thoroughly. Please read the "Safety Instructions" carefully before using this appliance. Failure to follow the instructions to use this appliance may result in injury or property damage.
Please Follow Instructions Below Safety Instructions Basic Information ■ Before using the appliance, please read the safety and operation instructions carefully and thoroughly. CONTENT ■ This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Page 3
Basic Information NCCO Technology ■ When any of the following situations occur, please stop operating the unit and disconnect the power supply immediately. (Otherwise, it may lead to electric shock, fire or smoke.) · When the power line is moved, the unit stops operating. Patented NCCO Air Purification Technology Brings Fresh and Clean Air ·...
Basic Information Getting Started Main Parts & Components First-time Operation 1. Remove all packaging materials, use a soft dry 4. The unit is equipped with a sensor. If filters are Illustration Diagram: cloth to clean all the parts then re-assemble not installed properly, the unit will not operate.
Page 5
Getting Started Getting Started Operating Instructions Operating Instructions 2. Default Air Speed& Memory Function First, align the four pins on the Front Cover with the four holes on the unit. Then, slightly push the Default Setting: The default air speed is at ‘03’. Every time the unit got disconnected from power Front Cover, the magnetic parts will attract the Front Cover towards to unit body.
Getting Started Care & Maintenance Operating Instructions Cleaning Instructions 5. ECO Mode 1. Always disconnect the power supply of the unit before any maintenance or care process is carried out (except replacing filters). (Otherwise the unit might still be running and could cause an electrical shock or injury) 2.
Filter Replacement & Care & Maintenance Other Information FAQs Maintenance ‘EE’ is displaying on Display Screen, the unit is not operating and making ‘DiDi·DiDi’ sound. 1. The lifetime of the filter will vary depending on the environment, amount of usage Please check if filters have been properly installed.
Other Information Other Information Trouble Shooting Product Specification 120Vac Rated Voltage Problems Solutions Power Supply 60Hz Rated Frequency Check if the unit is correctly connected to its power supply. The unit does not operate. Lowest Turn on the unit. Power Consumption Highest Mode...