Sharp XG-K230XA Manual page 194

Setting of Search Port
(ADVANCED[0]Search Port)
Sets the port number used when searching for the
projector from the network.
1 1 1 1 1 Enter "0" and press the "Enter" key.
2 2 2 2 2 Enter numerical value and press the "Enter" key.
Display set numerical value (*).
• Set according to need. Normally, use with the fac-
tory default setting.
Return to Default Settings
(ADVANCED[!]Restore Default
Setting)
Returns all menu setting values to the default state.
1 1 1 1 1 Enter "!" and press the "Enter" key.
2 2 2 2 2 Enter "y" and press the "Enter" key.
• If the values for IP Address, Subnet Mask or Gate-
way of the projector have been returned to the
default settings via Telnet, the computer cannot
be connected to the projector depending on the
computer's network settings.
Setting up the Projector Using RS-232C or Telnet
Return to Main Menu
(ADVANCED[Q]Return to Main Menu)
Returns to the main SETUP MENU.
1 1 1 1 1 Enter "q" and press the "Enter" key.
Returns to the SETUP MENU.
-29