Assembly & Set-Up - Troy-Bilt TB130 Operator's Manual

Assembly & Set-Up
Contents of Carton
• One Lawn Mower
• One Lawn Mower Operator's Manual •
NOTE: Please be aware that this Operator's Manual covers both
the low and high wheel models of this mower. While this manual
illustrates the low wheel model, the instructions and features
are equally applicable to the high wheel model as well, unless
otherwise noted.
Assembly
NOTE: This unit is shipped without gasoline or oil in the engine.
Fill up with gasoline and oil as instructed in the accompanying
engine manual BEFORE operating your mower.
Handle
1. Remove any packing material which may be between
upper and lower handles.
a. Remove wing nuts and carriage bolts from handle
as shown in Figure 3-1. Do not loosen or remove
adjacent hex head screws.
A
Figure 3-1
• One Grass Catcher
One Engine Operator's Manual
A
• One Bottle of Oil
• One Side Discharge Chute
b. While stabilizing mower so it doesn't move, pivot
upper handle up as shown in Figure 3-2. Do not
crimp cable while lifting the handle up.
Figure 3-2
3
B
9