Table of Contents
Advertisement
4.
Save any operating state (for example, press
5.
Turn the power off and then back on.
A normal display free of error messages should appear. If not, the power supply requires service.
Runtime Error Messages
Under unusual operating conditions, the V0LT or AMPS display may show +OL or -OL. This indicates that the output
voltage or current is beyond the range of the meter readback circuit.
Table 3-4 shows other error messages that may appear at runtime.
EE WRITE ERR
SBUB FULL
SERIAL DOWN
STK OVERFLOW
UART FRAMING
UART OVERRUN
UART PARITY
38
Turn-On Checkout
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 3-4. Runtime Errors
Display
EEPROM status time-out
Message too long for buffer
Failed communication with front panel
Front panel stack overflow
UART byte framing error
Overfilled UART receive buffer
UART byte parity error
Meaning
Advertisement
Table of Contents
