Disabling the Calibration Mode
To disable the calibration mode, press
If you shut off the power supply with calibration enabled, it will be disabled when you turn it back on.
Calibration Error Messages
The following error messages may appear during calibration:
CAL ERR0R
D0ES N0T CAL
PASSWD ERROR
WR0NG M0DE
66
Calibration
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
. The display will return to the meter mode with the Cal annunciator off.
Table A-3. Calibration Error Messages
An entered value is not within acceptable range.
Computed calibration constant is out of range.
You entered an incorrect password.
The power supply is not in CV or CC mode, as required.