Honeywell ESSER 781443 Installation Instructions Manual page 22

Venturi-Air Duct Kit
Intended purpose
This product must only be used for the applications outlined in the catalogue and the technical description
and in combination with external components and systems which have been approved.
Warning
In order to ensure correct and safe operation of the product, all guidelines concerning its transport, storage,
installation, and mounting must be observed. This includes the necessary care in operating the product.
Safety-relevant user information
This manual includes all information required for the proper use of the products described.
The term 'qualified personnel' in the context of the safety information included in this manual or on the
product itself designates:
•
project engineers who are familiar with the safety guidelines concerning fire alarm and extinguishing
systems.
•
trained service engineers who are familiar with the components of fire alarm and extinguishing systems
and the information on their operation as included in this manual.
•
trained installation or service personnel with the necessary qualification for carrying out repairs on fire
alarm and extinguishing systems or who are authorised to operate, ground and label electrical circuits
and/or safety equipment/systems.
Safety warnings
The following information is given in the interest of the personal safety and to prevent damage to the product
described in this manual and all equipment connected to it.
Safety information and warnings for the prevention of dangers putting at risk the life and health of user and
maintenance personnel as well as causing damage to the equipment itself are marked by the following
pictograms. Within the context of this manual, these pictograms have the following meanings:
Warning sign
Designates risks for man and/or machine. Non-compliance will create risks to man and/or
machine. The level of risk is indicated by the word of warning:
Important information on a topic or a procedure and other important information!
§
Observe configuration and commissioning information in accordance to the national and local
requirements.
Dismantling
In accordance with Directive 2002/96/EG (WEEE), after being dismantled, electrical and
electronic equipment is taken back by the manufacturer for proper disposal.
22
FB 798349 / 04.13