Download
Share
Print this page
Hyundai HNHP2265AC Original Instructions Manual
  1. Manuals
  2. Brands
  3. Hyundai Manuals
  4. Pressure Washer
  5. HNHP2265AC
  6. Original instructions manual

Hyundai HNHP2265AC Original Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual

Advertisement

loading

Related Manuals for Hyundai HNHP2265AC

Summary of Contents for Hyundai HNHP2265AC

  • Page 2: Safety Instructions

    SAFETY INSTRUCTIONS - Use this unit as described in this manual. Any mishandling and any use contrary to instructions for use shall in no case be the responsibility of the manufacturer. - Failure to observe the safety and operating instructions may result in a risk of electric shock, fire and / or personal injury.
  • Page 3 of the machine in a safe way and understand the hazards involved. - If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. - Before any connection, check: ...
  • Page 4 - Do not walk on the power cord, do not exert excessive pressure, or pull on the cord to avoid damage. - WARNING: This machine been designed for use with a cleaning agent supplied recommended manufacturer. Use of other cleaning or chemical agents may affect the safety of the machine.
  • Page 5 - WARNING: High pressure cleaners shall not be used by children or untrained personnel. - WARNING: High pressure hoses, fittings and couplings are important for the safety of the machine. Use only hoses, fittings and couplings recommended by the manufacturer. - WARNING: To ensure the safety of the machine, only...
  • Page 6 - WARNING: Do not use the machine if a supply cord or important parts of the machine are damaged, e.g. safety devices, high pressure hoses, trigger gun. - WARNING: If an extension cord is used, the plug and cable must be watertight. - WARNING: Inadequate extension cords can be dangerous.
  • Page 7 - The high pressure hose must remain connected to the machine as long as the system is under pressure. - Do not use corrosive or flammable liquids in the machine. - The appliance must be connected to a water supply using a new set of hoses; the old pipe set must not be reused.
  • Page 8 device that interrupts power if the earth leakage exceeds 30 mA for 30 ms or a device that will homologate the earth circuit. - CAUTION: When activating the machine, the high pressure of the water coming out of the hose can create a kickback; Pay attention to the movement of the spear.
  • Page 9 - CAUTION: In order to avoid danger due to untimely resetting of the thermal cut-out, this device must not be powered by an external switch, such as a timer, or connected to a circuit that is regularly switched on energized and de-energized by the electricity supplier.
  • Page 10 - In case of accidents or breakdowns, stop to use the tool, switch off it and unplug it. Check the conditions of the tool and bring it to a service agent for inspection and reparation if necessary. - When opening the trigger gun, pay attention to the kickback force.

  • Page 11: Intended Use

    technician. In the event of an overflow, move the machine away and clean the overflow. - During use, transport, assembly, disassembly, in case of failure, during foreseeable tests or breakdowns, the tool must always remain upright. Intended use The high-pressure cleaner is used to clean objects and outdoor surfaces (tools, vehicles, boats, terraces, facades, garden furniture etc.) with a high-pressure water jet.
  • Page 12 WARNING! The jet should not be directed at people, animals, live devices or the device itself. This machine is not suitable for connection to the drinking water supply network. Sound power level guaranteed. Degree of protection IPX5, this means that the device is protected against a small jet of water sprayed e.g.
  • Page 13 Description...
  • Page 16 Delivery contents Description of the device (photo 1) 1 high-pressure cleaner 1. Carrying handle 1 high-pressure hose 2. Hose drum 1 spray gun 3. Hose connection 1 spray tube 4. High-pressure hose 1 dirt milling machine 5. Operation switch 1 wide jet nozzle 6.
  • Page 17 24. Round jet 25. Rotary brush Technical data Nominal voltage 220-240 V~ Frequency 50 Hz Nominal power 2200 W Water flow temperature, max. 40° C Water production, min. 6.0 l/min Water production, max. 7.5l/min Water production pressure, max. 0,3 MPa (3 bars) Operating pressure, nominal.
  • Page 18 Automatic stop of the engine This high-pressure washer is equipped with an automatic engine stop. If the trigger (19) of the spray gun is activated during operation, the motor stops automatically. By pressing the trigger (19) again, the motor restarts. During short work breaks, the trigger (19) of the spray gun (11) should be locked by the locking system (18) to prevent unintentional starting of the engine.
  • Page 19 correct position. The minimum recommended length for the water supply hose is 10 meters (but not more than 25 meters) with a diameter of 12.5 mm to avoid back pressure and any risk of potential damage to your device. Make sure it can withstand water and a maximum pressure of 0.3 MPa (3 bar).
  • Page 20 Multiple jet nozzle  Adding detergent is only possible in low pressure operating mode. Push the nozzle sleeve (22) forwards or backwards to switch the high pressure cleaner from the high pressure operating mode to the low pressure operating mode and vice versa. ...
  • Page 21 Surfaces cleaner The surface cleaner (17) allows efficient cleaning of terraces, paths and similar large surfaces. This function provides the user with optimum splash protection. The high pressure nozzles in the cleaning housing are rotated by water pressure. The housing and tight brushes close to the edge prevent splashing.
  • Page 22 Completing the cleaning  Switch off the pressure washer with the operating switch (5) and press "OFF" to unplug the plug.  Turn off the water supply and remove the device from the water drain.  Operate the spray gun (11) until the device is no longer pressurized. ...
  • Page 23  The supplied cleaning needle (15) is used to clean the nozzle. After each use of the pressure washer, push the cleaning needle (15) through the nozzle from the front to remove any foreign material or deposits in the nozzle. Storage ...

  • Page 24: Warranty

    Warranty We guarantee this product for 2 full years. The warranty period for this item starts on the day of purchase. You can prove the date of purchase by sending us the original receipt. We insure over the entire warranty period: •...
  • Page 25 BUILDER SAS ZI, 32 rue Aristide Bergès – 31270 Cugnaux - France Declares that the machinery designated below: HIGH-PRESSURE CLEANER Ref.: HNHP2265AC Serial number: 20200609763-20200610262 Complies with the provisions of the Directive “machinery” 2006/42/CE and national laws transposing it: Also complies with the following European directives:...