Analog Graphic Display
The G3 Analog I/O modules have an integrated graphic display that may be used to
configure the parameters of the modules as well as show diagnostic information. Please see
the following pages for detailed information regarding these displays.
G3 Series EtherCAT
I/O MAPPING
INPUT BYTE XX
I/O MAPPING
OUTPUT BYTE XX
MODULE NUMBER
ALARM SETTINGS
DESCRIPTION
2AI/2AO
PART NUMBER
240-2XX
FIRMWARE
V2.XXX
SET BRIGHTNESS
MEDIUM
SET SELF TEST
FACTORY
DEFAULTS
HELP
TDG3ECM1-5EN
Subject to change without notice
www.asco.com/g3
Technical Manual
TM
XX
07/2020
10-99