501 Series, Up To 128 Solenoid Coils - Emerson Aventics G3 Series Technical Manual

G3 Series EtherCAT

501 Series, up to 128 solenoid coils

501 series, 8 station manifold with integrated 32 coil valve driver, auxiliary power connector and mid-station supply and
exhaust ports
• To be used with 501 series valves on valve manifold assemblies with 33-128 coils.
• Up to 3 of these valve drivers can be used on each assembly
•
Required to use on manifold assemblies larger than 64 coils, this manifold block has a M12 power connector to
supplement the main power connection on the G3 node and two additional port 1 supply and port 3/5 exhaust
ports.
• Aux power is required to be connected to the aux power connector provided on the extended coil valve driver.
Mid-Station Supply/Exhaust
Byte X X+1 X+2
Integrated 32 coil
valve driver
X+3 X+4 X+5 X+6 X+7
TDG3ECM1-5EN
Subject to change without notice
www.asco.com/g3
Technical Manual
TM
Integrated 32 coil
valve driver
Pin #1 = No Connection
2 1
Pin #2 = No Connection
Pin #3 = 0 VDC
3 4
Pin #4 = +24 VDC
X+8 X+9 X+10 X+11
07/2020
Auxiliary Power
X+12
X+13 X+14 X+15
9-90