502 And 503 Series, Up To 80 Solenoid Coils - Emerson Aventics G3 Series Technical Manual

G3 Series EtherCAT

502 and 503 Series, up to 80 solenoid coils

502 and 503 series, 4 station manifold with integrated 16 coil valve driver, power connector and mid-station supply and
exhaust ports
• To be used with 502 and 503 series valves on valve manifold assemblies with 33-80 coils.
• Up to 3 of these valve drivers can be used on each assembly
•
Required to use on manifold assemblies larger than 32 coils, this manifold block has a M12 power connector and
two additional port 1 supply and port 3/5 exhaust ports.
• Aux power is required and will provide power to the 16 coils available via the extended coil valve driver.
Integrated 16 coil
valve driver
Byte X Byte X+1 Byte X+2
Mid-Station Supply/Exhaust
Byte X+3
Byte X+4 Byte X+5
TDG3ECM1-5EN
Subject to change without notice
www.asco.com/g3
Technical Manual
TM
Pin #1 = No Connection
2 1
Pin #2 = No Connection
Pin #3 = 0 VDC
3
4
Pin #4 = +24 VDC
Byte X+6 Byte X+7
Recommended blank station plates to achieve
maximum number of coils with least number of
stations
07/2020
Auxiliary Power
Byte X+8 Byte X+9
9-91