Table of Contents
Advertisement
InfoCenter Icon Description (cont'd.)
Slow
Fuel level
The glow plugs are active.
Raise the cutting units.
Lower the cutting units.
Sit in the seat.
The parking brake is On.
The range is high (transport).
Neutral
The range is low (mow).
Engine-coolant temperature (°C or
°F)
Temperature (hot)
The PTO is engaged.
Not allowed
Start the engine.
Shut off the engine.
Engine
Key switch
The cutting units are lowering.
The cutting units are raising.
PIN passcode
CAN bus
InfoCenter Icon Description (cont'd.)
Symbols are often
combined to form
sentences. Some
examples are shown
below
Using the Menus
To access the InfoCenter menu system, press the
menu access button while at the main screen. This
brings you to the main menu. Refer to the following
tables for a synopsis of the options available from
the menus:
Note:
Only "operator-faced" text is translated. Faults,
Service, and Diagnostics screens are "service-faced".
Titles are in the selected language, but menu items
are in English.
25
InfoCenter
Bad or failed
Bulb
Output of TEC controller or control
wire in harness
Switch
Release the switch.
Change to the indicated state.
Put the machine into Neutral.
Engine start is denied.
Engine shutdown
Engine coolant is too hot.
Sit down or set the parking brake
Advertisement
Table of Contents
