Product Overview; Controls - Toro 03676 Operator's Manual

Product Overview

1. Engine hood
2. Operator's seat
3. Control arm
4. Steering wheel

Controls

Traction Pedal
The traction pedal (Figure
and reverse operation. Press the top of the pedal to
move the machine forward and the bottom to move
the machine backward. Ground speed depends on
how far you press the pedal. For no load, maximum
ground speed, fully press the pedal while the throttle
is in the F position.
AST
To stop the machine, reduce foot pressure on the
traction pedal and allow it to return to the center
position.
Figure 40
5. Seat adjustments
6. Front cutting units
7. Rear cutting units
41) controls the forward
g216864
1. Traction pedal
2. Mow/transport lever
3. Mow-speed limiter and
spacers
Mow/Transport Lever
Use the mow/transport lever
machine into M
the lever forward to select the M
backward to select the T
Note:
The cutting units cannot be lowered when the
mow/transport lever is in the T
Mow-Speed Limiter
When the mow-speed limiter
up/forward it limits the mow speed and allow the
cutting units to be engaged. Each spacer adjusts
the mowing speed by 0.8 km/h (0.5 mph). The more
spacers there are on the top of the bolt, the slower the
machine goes. Flip the mow speed limiter backward
to allow maximum transport speed.
Brake Pedal
Press the brake pedal
Parking Brake
To engage the parking brake,
on the brake pedal and press the top forward to latch
it. To release the parking brake, press the brake pedal
until the parking-brake latch retracts.
22
Figure 41
4. Brake pedal
5. Parking brake
6. Tilt steering pedal
(Figure 41) to put the
mode or T
OW RANSPORT
mode, and
OW
mode.
RANSPORT
RANSPORT
(Figure
(Figure 41) to stop the machine.
(Figure
g003955
mode. Push
position.
41) is flipped
41) push down